RichAuto B57 ATC DSP Controller

Known model facts#

Product overview#

RichAuto B57 is the B5X series ATC controller for automatic tool change routers, woodworking machines, stone carving, and molding machines where tool library management, T command recognition, and spindle alarm handling are needed. The B57 model page lists a DSP CPU, 512MB internal memory, a 5-inch color screen, U disk and USB-cable communication, 3-axis interpolation, differential signal, 16I/8O wiring, an 8-tool library, configurable rack locations, T-command recognition and tool-magazine controls. The official B5X manual instead lists 1GB memory, U disk/network communication and 10MHz maximum pulse frequency for the B5X system. No reviewed revision notice resolves those differences.

Key highlights#

Technical specifications#

Product gallery#

Features#

• Supports up to 8 tools with customizable rack locations.
• T command recognition for automatic tool change operations.
• Tool magazine lift/fall, cover, and dust hood control.
• Detection mechanism for tool holding, magazine in place, and hard limits.
• Servo driver alarm and inverter alarm support.
• Compatible with both domestic and imported ATC spindles.
• New tool change and setting method for improved efficiency.
• 5-inch color screen with simulation and code viewing.

Applications#

• ATC routers
• Woodworking machinery
• Stone carving
• Molding machines

Selection notes#

Frequently asked questions#

How many tools does the B57 support?#

The B57 supports up to 8 tools with customizable rack locations. It recognizes T commands for automatic tool change and supports tool magazine lift/fall, cover control, and dust hood.

Does the B57 work with both domestic and imported ATC spindles?#

Yes. The B57 supports both domestic and imported tool change spindles. Confirm the specific ATC spindle model and tool change mechanism before ordering.