Kinco GL043

Kinco Green Series Basic (GL) HMI Panels

Kinco GL043

Model GL043

Kinco GL043 (No Ethernet / No USB Host (4.3" model)) is a 4.3" Green Series Basic HMI panel with 480x272 resolution, ARM RISC32Bit 800MHz, 128M RAM +…

#Kinco#HMI#GL
RFQWhatsApp
On this page

Known model facts

LabelValue
Display4.3” 480x272
ProcessorARM RISC32Bit 800MHz
CommunicationEthernet: No
SoftwareKinco DTools

Product overview

Kinco GL043 (No Ethernet / No USB Host (4.3” model)) is a 4.3” Green Series Basic HMI panel with 480x272 resolution, ARM RISC32Bit 800MHz, 128M RAM +… Configuration note: No Ethernet / No USB Host (4.3” model). Include the complete model suffix when matching this panel to an existing control cabinet or replacement project. As a Basic-tier panel, this model targets cost-sensitive applications with essential HMI features. E-suffix variants add Ethernet and EdgeAccess remote maintenance capabilities. Key ordering points are the 4.3” display, 119x93mm cut-out requirement, DC10V-28V power supply, and Kinco DTools project compatibility.

Key highlights

HighlightPublished value
Display4.3” 480x272
ProcessorARM RISC32Bit 800MHz
CommunicationEthernet: No
SoftwareKinco DTools

Technical specifications

SpecificationPublished value
Model CodeGL043
Variant NoteNo Ethernet / No USB Host (4.3” model)
Screen Size4.3”
Resolution480x272
Display Area95.04mm(H)x53.86mm(V)
Display Colors16.7 million
Viewing Angle70/70/50/70 (L/R/U/D)
Contrast Ratio500
BacklightLED
Brightness450 cd/m²
Backlight Life>30000 hours
Touch Panel4-wire precision resistive network
CPUARM RISC32Bit 800MHz
RAM128M
Flash256M
USB Host-
USB Slave1
Ethernet-
Communication PortsCOM0
/RS485/RS422; COM2
Input PowerDC10V-28V
Power Consumption2W@24VDC
Allowable Power Loss<3ms
Insulation Resistance>50 MOhm @ 500V DC
Voltage Endurance500V AC 1 minute
Dimensions132x102x33mm
Panel Cut-out119x93mm
EnclosureEngineering plastic
MountingPanel mounting
Operating Temp0~50°C
Storage Temp-20~60°C
Operating Humidity10~90%RH (Non-condensing)
Storage Humidity10~90%RH (Non-condensing)
Vibration Resistance10~500Hz, 30m/s², X/Y/Z direction per hour
CoolingNatural air cooling
IP RatingFront panel: IP65
Power Isolation-
CE CertificateEN61000-6-4
+1
, EN61000-6-2
Configuration SoftwareKinco DTools
Remote Maintenance-

Kinco GL043 product image

Applications

  • Packaging Machinery
  • Plastics Processing
  • Textile Machinery
  • HVAC and Building Automation
  • Water Treatment & Pump Stations

Selection notes

Frequently asked questions

What is the Kinco GL043 HMI panel?

The Kinco GL043 is a 4.3” HMI panel from the Green Series Basic series with 480x272 resolution, 4-wire precision resistive network, and Front panel: IP65 front-panel protection.

What are the key specifications of the Kinco GL043?

4.3” 480x272 display, ARM RISC32Bit 800MHz processor, 128M RAM, 256M flash, 4-wire precision resistive network, dimensions 132x102x33mm, cut-out 119x93mm, power DC10V-28V (2W@24VDC), operating temp 0~50°C.

Which software is used to configure the Kinco GL043?

Use Kinco DTools for project editing and download. Remote maintenance is not available on this model.

What should I provide when requesting a quote for Kinco GL043?

Provide the full model code GL043, screen size, communication port requirements, cut-out dimensions, and quantity. Include information about any existing HMI replacement needs or project migration requirements.