Kinco GL100

Kinco Green Series Basic (GL) HMI Panels

Kinco GL100

Model GL100

Kinco GL100 is a 10.1" Green Series Basic HMI panel with 1024x600 resolution, ARM RISC32Bit 800MHz, 128M RAM + 256M flash, and 4-wire precision resistive…

#Kinco#HMI#GL
RFQWhatsApp
On this page

Known model facts

LabelValue
Display10.1” 1024x600
ProcessorARM RISC32Bit 800MHz
CommunicationEthernet: No
SoftwareKinco DTools

Product overview

Kinco GL100 is a 10.1” Green Series Basic HMI panel with 1024x600 resolution, ARM RISC32Bit 800MHz, 128M RAM + 256M flash, and 4-wire precision resistive… This model belongs to Kinco Green Series Basic (GL) HMI Panels; match the screen size, cut-out dimensions, communication ports, and software platform before ordering. As a Basic-tier panel, this model targets cost-sensitive applications with essential HMI features. E-suffix variants add Ethernet and EdgeAccess remote maintenance capabilities. Key ordering points are the 10.1” display, 260x179mm cut-out requirement, DC10V-28V power supply, and Kinco DTools project compatibility.

Key highlights

HighlightPublished value
Display10.1” 1024x600
ProcessorARM RISC32Bit 800MHz
CommunicationEthernet: No
SoftwareKinco DTools

Technical specifications

SpecificationPublished value
Model CodeGL100
Screen Size10.1”
Resolution1024x600
Display Area222.72mm(H)x125.28mm(V)
Display Colors16.7 million
Viewing Angle85/85/85/85 (L/R/U/D)
Contrast Ratio500
BacklightLED
Brightness300 cd/m²
Backlight Life>30000 hours
Touch Panel4-wire precision resistive network
CPUARM RISC32Bit 800MHz
RAM128M
Flash256M
USB Host1
USB Slave1
Ethernet-
Communication PortsCOM0
/RS485/RS422; COM2
Input PowerDC10V-28V
Power Consumption6W@24VDC
Allowable Power Loss<3ms
Insulation Resistance>50 MOhm @ 500V DC
Voltage Endurance500V AC 1 minute
Dimensions271x191x36mm
Panel Cut-out260x179mm
EnclosureEngineering plastic
MountingPanel mounting
Operating Temp0~50°C
Storage Temp-20~60°C
Operating Humidity10~90%RH (Non-condensing)
Storage Humidity10~90%RH (Non-condensing)
Vibration Resistance10~500Hz, 30m/s², X/Y/Z direction per hour
CoolingNatural air cooling
IP RatingFront panel: IP65
Power Isolation-
CE CertificateEN61000-6-4
+1
, EN61000-6-2
Configuration SoftwareKinco DTools
Remote Maintenance-

Kinco GL100 product image

Applications

  • Packaging Machinery
  • Plastics Processing
  • Textile Machinery
  • HVAC and Building Automation
  • Water Treatment & Pump Stations

Selection notes

Frequently asked questions

What is the Kinco GL100 HMI panel?

The Kinco GL100 is a 10.1” HMI panel from the Green Series Basic series with 1024x600 resolution, 4-wire precision resistive network, and Front panel: IP65 front-panel protection.

What are the key specifications of the Kinco GL100?

10.1” 1024x600 display, ARM RISC32Bit 800MHz processor, 128M RAM, 256M flash, 4-wire precision resistive network, dimensions 271x191x36mm, cut-out 260x179mm, power DC10V-28V (6W@24VDC), operating temp 0~50°C.

Which software is used to configure the Kinco GL100?

Use Kinco DTools for project editing and download. Remote maintenance is not available on this model.

What should I provide when requesting a quote for Kinco GL100?

Provide the full model code GL100, screen size, communication port requirements, cut-out dimensions, and quantity. Include information about any existing HMI replacement needs or project migration requirements.